Comflor Deck Roll Forming Machine
Profile
Material
Effective Width: 450mm Effective Width Tolerance: ±0.5mm
Material Thickness:1.2mm The Length Of Tolerance:±1(4m)
Applicable Material:Galvanized Sheet(GI) Inspection Thickness:1.2mm
With yield strength:G550Mpa
Work Flow
Decoiler→Feeding Device→leveling Device→Hydraulic Punching Machine→Hydraulic Pre Cutting Device→Feeding Guide Device→Roll Forming Mill→Hydraulic Post Cutting Device→Embossing Device→AUTO Stacker Device
Machine Components
1)Hydraulic Uncoiler: one set
Hydraulic control steel coil inner bore shrinkage and stopMax. feeding width:1250mm
Coil ID Range:508±30mm
With Coil Car And Press Arm
2)Feeding Device
Use Two Electric Motor To Auto Control Feeding Width
3)Leveling Device
Servo Motor Drive
4)Hydraulic Punching device
Pre-punching and post-cutting, use the same hydraulic system
Hydraulic motor: 11kw, Hydraulic pressure range: 16Mpa
Punching and Cutting tool material: mold steel Cr12Mov(=D2 steel, with one million times punching/cutting life), Heat treatment to HRC58-62 degree
4-cylinders hole punching system for punching both on web and flange:
5)Roll Forming Machine
Body frame made from H450 type steel by welding
Side wall thickness: Q235 t18mm
Rollers manufactured from Bearing steel GCr15(=EN31 steel), heat treatment HRC58-62 Degree
Shafts manufactured from 45# steel,Quenching and tempering , hard chrome plating.Diameter=φ75mm,precision machined
Main Motor=15KW,Frequency speed control
Speed reducer motor:K series
Chain: ZIQIANG (by China TOP 1 brand DONGHUA Group)
All the screw bolts with grade 8.8(cheap factories use low grade 4.8) to ensure fix the machine structure tightly and long life during the machine long time running.
Product speed:5m/min(Including punching and cutting time)
6) Hydraulic Post Cutter
Post to cut, stop to cutting,Three pieces type of cutting blade design, no blanking
Hydraulic motor: 11KW ;Cutting pressure: 0-12Mpa;
Cutting tool material: Cr12Mov(= SKD11 with at least one million times of cutting life), Heat treatment to HRC58-62 degree
The cutting power is provided by the independent engine hydraulic station(Look Below)
7) Embossing Device
8)PLC Control System
Control The Quantity And Cutting Length Automatically
Input The Production Data(Production Batch,pcs,Length,etc.)On The Touch Screen ,
It Can Finish The Production Automatically.
Combined With: PLC, Inverter, Touch Screen, Encoder, etc
9) AUTO Stacker Device
10)Product Show
After-Sale Service
1. The warranty is 24 months after the client receives the machine.
Within the 24 months, we will courier the replacement parts to the client free of charge
2. We offer technical support for the entire life of our machines
3. We can send our technicians to install and train the workers in the clients' factories with
extra cost
Packing method
Main body of machine is naked and covered by plastic film(to protect of dust and corrosion),loaded into container and steadily fixed in container suitable by steel rope and lock, suitable for long-distance transportation.
